Saturday, January 8, 2011

Erin's Forks

In the picture above I'm starting out by knotching a fork blade that the dropout will insert into. The slot needs to be a few thousandths larger than the dropout.
Next I sandblast the forks inside and out to prep them for brazing.

Here I've brazed the dropout in with silver braze.

Next I spend some time cleaning it up. Sanding and filing.

And finally I assemble it into the fixture to braze the fork blades to the crown.


  1. Dwight - would you make a mountain bike fork?

    If so, how much?

  2. This comment has been removed by the author.

  3. I'm sorry this has taken so long. I haven't checked for comments. If you're still interested email me at